- Go to the "PRINTABLES" section and select a printable card that you'd like to customize.
- Select the card blank you'd like to customize and print.
- You will find two buttons beneath the card preview. These two buttons are labeled: "CUSTOMIZE & PRINT FRONT" & "CUSTOMIZE & PRINT INSIDE".
- It is a good idea to customize the front of your card first. Click the "CUSTOMIZE & PRINT FRONT" button and wait for the card printing interface to load up in your browser.
- Once the interface has loaded, follow the instructions there to customize and print out the front of your card.
- After you are finished printing the front of your card, close the window and click the "CUSTOMIZE & PRINT INSIDE" button.
- Follow the same procedure as before to customize the inside of your card.
Always print the front of your card first, then turn your paper over and place it back into your printer to print the inside of your card. Once you are done, you can trim the card down using the crop marks provided on the printout.
If you check with your local office depot or staples online, you can find standard greeting card paper that is thicker than other stocks. This is designed to be used with card printing online or from PC software. We have found this makes the most suitable stock for our greeting cards as well.
At this time we do not offer the custom printing for envelopes. However, we are working on this for future release.
|
|
